Luftkompressor Wabco Audi A6 C6 4F 4F0616005E
Audi A6 C6 4F air supply device with WABCO compressor air suspension 4F0616005E
- Säkra betalningar
- 2 Års Garanti
This product is equivalent to an original Audi air supply device.
The compressor corresponds to the original. Same manufacturer - Made in Germany.
All attachments are new.
The valve is an OEM new part.
The finish with high-quality components, such as aluminium bracket, cables, suspension elements, relay and compressed air hose, made in Germany make this product an adequate product to the original.
The highest quality management of the OE original equipment manufacturer and manufacturer of this compressor ensures that you get an absolutely new rebuilt original compressor in the same quality.
Can be installed in the following vehicles:
Audi A6/Avant C6 Typ 4F, 2005 from VIN 4F-5-000001 >>
Audi A6/Avant C6 Typ 4F 2006 - 2008
Audi A6/Avant C6 Typ 4F 2009 - 2010
Audi A6/Avant C6 Typ 4F 2011 from VIN 4F-B-000001>>
Audi A6 Allroad Quattro C6 Typ 4F 2007 - 2011
Audi A6/S6 Avant Quattro C6 Typ 4F 2005 from VIN 4F-5-000001>>
Audi A6/S6 Avant Quattro C6 Typ 4F 2006 - 2008
Audi A6/S6 Avant Quattro C6 Typ 4F 2009 - 2010
Audi A6/S6 Avant Quattro C6 Typ 4F 2011 from VIN 4F-B-000001>>
Original spare part number:
4F0 616 005 E ; 4F0616005E
4F0 616 005 F ; 4F0616005F
4F0 616 006 A ; 4F0616006A
4F0 616 005 B ; 4F0616005B
4F0 616 005 D ; 4F0616005D
Scope of delivery:
-Thermal/Temp. sensor (original designation G290)
-Air intake tube
-Mounted on a stainless steel holder
-Air intake hose
-Valve block 4F0616013
CAUTION: The replacement of the relay is mandatory, otherwise the warranty on the compressor is forfeited!
Before you buy a compressor please keep in mind that the main reason a compressor fails is because there is a leak in the Air Suspension System causing the compressor to overwork and "Burn Out". The most common cause for a leak in the system is an old leaky air spring bag. Your compressor warranty will be voided if air spring bags have not been recently replaced in your vehicle. We recommend that in order to maintain your Air Suspension System in optimal condition you purchase new air spring bags.
-Made in Germany
-Much cheaper than authorized repair
-We as German provider have the European returns policy
-We also have a 2 years warranty
-Worldwide express delivery is our standard
-In Europe we have the longest experience with the topic of air suspension for automobiles in the after market.
Our technical advise for the air supply device:
1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting.
Change the rubbers and springs of the mounting in any case.
2. A porous intake hose often is the cause for a breakdown of the compressor.
Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
3. Change the relays before installing the compressor even if it seems to still work.
This is also a specification by the car manufacturer. Be sure to change the right relays.
Relays look similar, that is why there is a risk to change the wrong relays.
4. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor. Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.