Rear Air Spring Ford Mercury Grand Marquis Arnott A-2105

The Arnott A-2105 is a new rear air spring for the Ford Crown Victoria, Mercury Grand Marquis and Lincoln Town Car. It replaces a leaking or sagging original air spring and restores the original comfort and ride height. The same part fits both rear left and rear right.

Fits

• Ford Crown Victoria 1992-2011 (4.6 L V8)
• Mercury Grand Marquis 1992-2011 (4.6 L V8)
• Lincoln Town Car 1990-1997 (5.0 L V8)
• Lincoln Town Car 1990-2011 (4.6 L V8)

Features

• Multi-ply air sleeve by Continental ContiTech
• Burst pressure tested to over 480 PSI (about 33 bar), six times normal working pressure
• High-impact resin top and bottom mounts with heavy-duty crimping rings
• Spring rate and load capacity to OE specification
• Pre-assembled, with a new seal kit
• Installation manual and video available

Specifications

OE numbers are given for reference. Always verify fitment against your vehicle model, year and engine before ordering.

Installation

• Installation manual online

Frequently asked questions

Does it fit both rear left and rear right?

Yes. A-2105 fits rear left and rear right.

Should I replace air springs in pairs?

Yes. Arnott recommends replacing them in pairs for an even ride height and matched suspension on both sides.

Should I replace the air dryer at the same time?

Arnott recommends replacing the dryer when replacing air springs. Moisture in the system may damage the compressor.

Are mounting parts included?

A new seal kit is included. Bearing plate, boot and mounting hardware are not included.