- On sale!
- -20%
Air Compressor Iveco Daily Wabco 4154034020
Air Suspension Compressor Wabco Iveco Daily 2006-
This is the original Wabco air supply device from the same supplier of the car manufacturer.
This compressor comes from the same production line and undergoes the same quality controls.
Can be installed in the following vehicles:
Iveco Daily 35/50
Iveco Daily IV (2006?2011)
Iveco Daily V (2011?2014)
Iveco Daily VI (2014?2019)
Original spare part number:
Wabco - Orginal: 021655
WABCO - replacement 4154034020 , 415 403 402 0
IVECO 500340807
AL-KO 1560096 , 156 009 6
Scope of delivery:
Compressor
Double Valve
Marten protection (electric cables)
CAUTION: The replacement of the relay is mandatory, otherwise the warranty on the compressor is forfeited!
Before you buy a compressor please keep in mind that the main reason a compressor fails is because there is a leak in the Air Suspension System causing the compressor to overwork and "Burn Out". The most common cause for a leak in the system is an old leaky air spring bag. Your compressor warranty will be voided if air spring bags have not been recently replaced in your vehicle. We recommend that in order to maintain your Air Suspension System in optimal condition you purchase new air spring bags.
Your advantage:
-German manufacturer
-Much cheaper than authorized repair
Our technical advise for the air supply device:
1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting.
Change the rubbers and springs of the mounting in any case.
Included in delivery!
2. A porous intake hose often is the cause for a breakdown of the compressor.
Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
Included in delivery!
3. Change the relays before installing the compressor even if it seems to still work.
This is also a specification by the car manufacturer. Be sure to change the right relays.
Relays look similar, that is why there is a risk to change the wrong relays.
Included in delivery!
4. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor. Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.